With more than 15 years of experience in the water treatment industry, we examine our customers’ existing systems, present their technical and economic pros-cons, and provide necessary engineering services during the consultancy period.
UF/RO, boiler, cooling water and waste treatment systems of the facility are examined mechanically, chemically, operationally and reported to the customer. Solutions to any existing or potential problems along with any possible improvements, developments, revisions are reported both technically and economically. As for chemical treatment and equipment efficacy, recommendations are made in accordance with the literature. In the above-mentioned audit and inspection, if improvement and development oppurtunities are caught in which chemicals and equipment requirement and/or changes arise, necessary support is provided to the customer. The water treatment program is prepared in terms of chemical and mechanical aspects, and technical consultancy is supplied from the beginning to the end of the tender. Extensive trainings on water treatment systems are provided, along with chemistry and mechanical engineering. It’s based on independent scientific data and facts rather than the subjective approaches of chemical and equipment manufacturers. It carries the innovations and experiences of the water treatment literature. It’s an annual consultancy that includes the 3 basic services mentioned above, monthly site visits and service for chemical analysis and checking equipment performances depending on the customer's needs. Steel mills water treatment carry high heat loads, include impurities and use a lot of water, so they are one of the most important facilities in water treatment. The closed cooling systems that does not have product contact (Electric arc furnace, ladle furnace, Continuous Casting Machine etc.) and ... Besides the HRSG and OTSG generated CCPPs, there is also a large number of coal fired power plants in Turkey. These high pressurized boiler systems require pure demi water. The steam turbines are highly valuable equipments designed with restricted operating limits, thus making the boiler water treatment very critical ... The Oxygen facilities are critical equipments where the cooling water and the product are in contact and therefore pressure, flow rate adjustments are followed neatly. The organic and inorganic actives of the chemical treatment program are ... Chemical plants inhold specific chemical productions that water systems are in touch with. Exchangeable heat loads/ cooling water loops, sudden and/or constant heat amounts in the reactors can cause acute and chronic troubles. The correct technical approach is critical to avoid downtime and/or production efficiency of the plant ... Water treatment has an important place in all factories that have waste water systems, cooling systems, boiler systems. Heat exchanger efficiencies, steam purity and proper treatment of waste water systems provide economical and technical benefits to the facilities ... In todays world, water production by reverse osmosis is popular. In these systems, UF systems may be used upstream as pre-treatment. Either as drinking water applications or industrial water use; correct membrane selection, accurate operating conditions (Pressure, flow rate, temperature) ... In all facilities that need cooling, open evaporative cooling systems and/or closed-circuit cooling systems are used depending on the required cooling capacity. Cooling towers remove the high thermal load by evaporating the circulating water. In these systems, significant amount of water is consumed ... High pressure HRSG (drum type) and OTSG (single pass) boiler systems are used extensively in power plants. Industrial type, especially water tube boilers, are preferred in general industry factories. HRSG and OTSG systems are boiler systems that require ultrapure feed water ... UF and RO systems are systems that require close monitoring. Chemicals used in RO systems and pretreatment (UF or other alternatives) are of great importance. In RO systems, we see more errors spread over time that gradually give damage, rather than major errors that may stop production in short time ... Waste water systems may be found in all factories such as steel plants, chemistry, textile, food industry factories, both in needs of environmental protection and water recovery. What we observe is, the prebuilt mechanical and operational characteristics are not revised by changing pollution and water characteristics in time ...
+1Years of Experience
%10-%10Savings on water
%10-%10Economic gains
Services
There’s nothing, the mind and logic cannot solve.
Atatürk
Areas of Expertise
Facilities
Steel Mills
Power Plants
Air Separation Plants
Chemical Plants
General Industry Factories
Water Production Plants
Systems
Evaporative (Cooling Tower) and Closed Cooling Systems
HRSG, OTSG and Industrial Type Boiler Systems
Sea, Surface, Well Water UF-RO Systems
Sedimentation and Waste Water Treatment Systems